Kampanjerbjudanden
BOPP Thermal film
The BOPP thermal film uses a special film-coating technology which spread the adhesive on the BOPP film, so as to protect the surface of the printing material.
Main characters:
1) Environment friendly, no pollution.
2) Simple operation, time saving.
3) The non-solvent based adhesive protects the printing color from changing.
4) Enhancement of the finish and gloss after lamination.
5) No bubble, wrinkle or desquamate
Remark: Both sides corona treatment is available on special order.
Technical specifications
|
Item Number |
D-24G (Gloss) |
D-27G (Gloss) |
D-30G (Gloss) |
D-27M (Matt) |
D-30M (Matt) |
|
|
Thickness (micron) |
Total |
24 |
27 |
30 |
27 |
30 |
|
Base |
12 |
15 |
15 |
15 |
18 |
|
|
Adhesive |
12 |
12 |
15 |
12 |
12 |
|
|
Proportion |
m2/kg |
44 |
40.1 |
36.036 |
41.14 |
38.138 |
|
Kg/m2 |
0.02273 |
0.0246 |
0.02775 |
0.0242 |
0.02622 |
|
|
Strength of coating |
g/25mm2 |
620 |
620 |
700 |
650 |
700 |
Width |
Up to 1450mm, can be cut into the required sizes. |
|||||
|
Length |
100m – 3000m, can be cut into the required sizes. |
|||||
|
Core size |
In 1” (25mm) or 2-1/4” (57mm) or 3” (76mm) at optional |
|||||
|
Connector |
Less than 2 |
|||||
|
Working temperature |
For normal printing material: 90℃-95℃; For special printing material: 95℃-105℃ |
|||||
|
Working pressure |
8-15 MPa |
|||||
|
Working speed |
Up to 20m/minutes |
|||||
|
Remark: |
Special printing material means the one with thick ink, dark color, high moisture, etc. |
|||||